Dry ice blasting in the food industry

Cleaning food production lines requires a method that is HACCP-compliant, keeps moisture out of equipment and prevents cross-contamination between runs. At the same time you want to keep downtime short; every hour of downtime is lost revenue. Conventional wet cleaning struggles to meet all of these at once.

Dry ice blasting meets all of these requirements: no water, no chemicals, food-grade CO₂ as the blast medium and a completely dry process. This article explains how it works for food applications, what the concrete benefits are, and which Cold Jet machines see the most use in the Dutch food industry.

Cold Jet dry ice blasting removes burnt dough residue from stainless steel wafer plates
Cold Jet dry ice blasting removes burnt dough residue from stainless steel wafer plates; food-safe, residue-free and without moisture in the baking equipment.

Why water and chemicals fall short in food

Wet cleaning introduces moisture into bearings, motors and electronic controls. That requires drying time and creates a risk of corrosion, bearing damage and electrical issues. Chemical cleaning agents need rinsing steps, carry safety risks for operators and have to be disposed of as wastewater.

In open production environments, where any contamination ends up in the product, that is a double problem: you remove one contamination by introducing another. Deep cleaning often means shutting down for hours or even days.

How dry ice blasting cleans safely in food production

Dry ice pellets are pure frozen CO₂ of food-grade quality. On impact, kinetic energy, thermal shock (minus 79 degrees Celsius) and direct sublimation to gas work together. The contamination comes loose, the CO₂ gas disperses and only the loosened contamination is left behind to be vacuumed or wiped away.

No moisture, no chemicals, no secondary waste. The method is FDA-, USDA- and EPA-approved for food applications. Cold Jet machines are used widely by food producers around the world.

Concrete benefits for food companies

  • ✓HACCP-compliant cleaning without chemicals or water
  • ✓Allergen management between product runs, with no cross-contamination risk
  • ✓No drying time; production restarts immediately after cleaning
  • ✓Safe around electronics, motors and bearings
  • ✓Reaches difficult areas (internal channels, screws, mixer blades)
  • ✓Faster changeovers and higher OEE
  • ✓FDA-, USDA- and EPA-approved
  • ✓Documentation for your HACCP and audit trail

Applications per food sub-sector

Cold Jet machines are widely used across the food industry. Each sub-sector has specific applications where the technology delivers the most value.

Sub-sectorTypical applicationsRecommended machine
BakeryOvens, proofing cabinets, dough mixers, baking plates, conveyorsAero 40FP / PCS Ultra
Chocolate and confectioneryChocolate lines, molds, dosing machines, cooling beltsi³ MicroClean 2 / PCS Ultra
DairyPasteurizers, fillers, piping, cheese moldsi³ MicroClean / PCS Ultra
Meat processing and slaughterhousesCutting blades, conveyors, hanging systems, meat grindersAero 40FP / PLT Ultra
PackagingSealers, fillers, labelers, glue systemsi³ MicroClean 2 / Aero 40FP

For further reading, see our article on dry ice blasting in the food industry and our page on HACCP-compliant cleaning.

Food sub-sectors in detail

For each food sub-sector we maintain a dedicated page with specific applications, recommended Cold Jet machines and customer cases. Click through for the details.

Clients in the Dutch food industry

Biscuit International cleans production lines for biscuits and sweet baked goods with Cold Jet. Markus & Markus Stroopwafels uses dry ice blasting for cleaning between the baking cycles of its stroopwafel production. In both cases Cold Jet replaces what used to be done with wet methods and manual labor; the result is shorter downtime and consistent, HACCP-compliant cleaning.

For production managers in food: a demo on your own line gives the clearest picture of the gain in time and quality. We bring a suitable Cold Jet machine to your site and demonstrate it on a few typical types of fouling from your production.

Want to use dry ice blasting in your food production? Request a no-obligation demo at your location.

Request a demo →

Frequently asked questions

Is dry ice blasting allowed in a HACCP-compliant production process?

Yes. Dry ice pellets consist of pure food-grade CO₂. On impact they sublimate directly to gas and leave no residue. That makes dry ice blasting suitable for cleaning between production runs without cross-contamination risk. We provide documentation for your HACCP system.

How does dry ice blasting compare with wet cleaning in food?

Wet cleaning requires drying time, introduces moisture into bearings and electronics and produces wastewater that has to be disposed of. Dry ice blasting is fully dry and faster to deploy. The choice depends on your production line; for areas where moisture is a risk, dry ice is almost always the better fit.

Can I remove allergens between production runs with dry ice blasting?

Yes, and more reliably than with wet methods because there is no moisture in the production equipment. We have experience with allergen management in the food industry. See also our article on allergen cleaning with dry ice.

Which Cold Jet machine fits a food production line?

For delicate equipment (fillers, sealers) we recommend the i³ MicroClean series. For heavy work (ovens, conveyors) the Aero 40FP or PCS Ultra. Our specialist visits you for an intake and advises on your specific installation.

How long does it take to clean a machine with dry ice blasting?

That depends on the type and frequency of contamination. For daily light cleaning a short session is enough. For deep cleaning between varying product runs it usually takes 30 to 90 minutes per machine. We provide concrete numbers after a demo at your location.

Does ColdBlast supply machines for specific food sub-sectors?

Cold Jet machines are widely used across bakery, chocolate lines, dairy production, meat processing and packaging. We advise on the right machine, pressure and accessories for each sector. Mention your sub-sector in your request for specific advice.